logotpt1 logotpt2
 
logobmt1
  bullet Home bullet Products bullet Faq's bullet Contact            





Hauppauge Nexus Satellite Receiver PCI Card


ALT+s to find next matching item.

Hauppauge lets you enter the Digital world of Satellite with its digital card WinTV-Nexus-S! It will be able to receive Digital Free to air Television, and to have a fast access to Turbo Internet.

Get digital video broadcasts on your PC: Receive free-to-air digital satellite TV and digital tvand radio stations directly on your PC!

WinTV-Nexus-s is a single slot DVB receiver board which brings digital satellite broadcasts (TV and radio) to your PC. Digital reception provides incredibly sharp TV pictures and near CD quality radio.


For more details on the features of the Hauppauge Nexus card, Please read below
The WinTV Nexus-s is designed for receiving, decoding and displaying Digital Video Broadcasts (DVB) via satellite on a standard Personal Computer. It includes a hardware MPEG decoder and a composite video output, so the digital satellite TV and digital tvprogram can be displayed both on the PC monitor and an external TV set.


With WinTV-Nexus-s, you can watch digital satellite TV and digital tvbroadcasts in a resizeable window on your PC screen and listen to digital radio in stereo. WinTV-Nexus-s lowers the cost of digital satellite tv reception by using your PC's processor to decode the TV image. If you have a 400MHz Pentium II or faster, you can use Nexus-s to display TV while still running other PC's applications. Surf the net while you watch high quality digital satellite tv.

Personal Digital VCR: With WinTV-Nexus-s, you can record your digital satellite tv programmes to your hard disk, and play them back in full original digital quality!

Compression Mpeg-2: Record whole films in formatMPEG-2. Since the DVB uses a format of compression MPEG-2, it can use functions of recording and Audio editing of programs and Video,directly from his hard disk. Compression MPEG-2 allows the recording in complete screen.

Broadband Internet has been developed to speed up the Internet web surfing and downloading performance. To use "Broadband Internet", you need to have an account with a "Broadband Internet" Service, plus an account with a local Internet Service Provider. The Internet access inside a local network over a Proxy server cannot be used.

 

How "Broadband Internet" Works: First, you connect to the Internet via your local Internet Service provider. Secondly, you log on to your Satellite Internet provider. If you are sending a request for a specified web page, the request goes via your local provider to the Satellite provider. They will then grab the Internet data and send this specified web page via Satellite back to your Computer. The speed is dependent on the satellite provider, however the WinTV-Nexus-s card is specified to receive and filter between 8 - 10Mbit/s.

WinTV-Nexus-s Features:

Supports Windows. 95, 98, ME 2000 and XP Reception of DVB Data services (max Download speed 8 - 10Mbit/s) Live digital satellite tv from satellite in a resizeable window Digital stereo radio Record and playback of digital satellite tv (using MPEG-2 compression)

Requirements:
  • PC with Pentium II Processor (min. 233MHz for Data reception) (min. 400MHz for TV reception)
  • Windows. 95, 98, ME, 2000 and XP
  • Free PCI 2.1 Slot
  • Sound Card
  • CD ROM Drive
  • DirectDraw. - compatible PCI/AGP Graphic card o Internet Explorer 4.X or higher o One free Interrupt (IRQ)
  • Digital Satellite Dish
Included in the package:
  • WinTV-Nexus-s PCI card
  • Remote control
  • Audio and video out cable
  • Software on CD ROM (incl. Manual in PDF Format)
  • Quick Installation Guide

Compatibility and requirements:

To use the WinTV Nexus card, you will need the following:
  • PC with Pentium Processor, (Pentium 266MHz or higher recommended)
  • Free bus-master PCI Socket
  • 32 MB RAM minimum
  • PCI or AGP Graphic card, running at a minimum resolution of 800 x 600 Pixel, in either 'High Colour' (16 Bit) or 'True Colour' (24 or 32 Bit)
  • Active speaker or soundcard/speaker combination
  • CD-ROM Drive (only required for software installation)
  • Microsoft Windows 95 / 98 / 2000
  • DirectX 5 or higher
  • Microsoft Internet Explorer 4.01 or higher

In addition, you need a connection to a digital ('combo' or 'high-band') satellite system. If this system incorporates a switch-box, this switch box needs to be DiSEqC (Digital Satellite Equipment Control) compatible. The physical connection on the WinTV Nexus card is a single F-Connector.


Connectors on the WinTV Nexus-S PCI card

  • LNB - F-Connector socket Signal input from your digital satellite system (check 'Compatibility' section, above).
  • Audio line-out - Stereo 3.5mm jack socket Analogue audio output signal, to connect to line-in of soundcard or active speakers. 7Composite video - Phono (RCA) socket Composite video output signal, for connection to additional analogue devices such as TV or VCR.
     
  • J3 - Internal audio socket CD-ROM Audio output, for connection to the internal port of soundcard (CD-ROM Audio in). This is required if the Audio line-out connector is not being used.
  • J4 - Internal audio socket CD-ROM Audio input, for connection to the analogue Audio-output of CD-ROM-drive. This is required if the Audio line-out connector is not being used and the sound card has only one internal CD-ROM Audio in socket, which is already being used.
  • J2 and J8 - Reserved for future expansion 7CI - Port for connection to the Common Interface Module Common Interface Module is a standard to enable the reception of 'subscriber' or 'pay per view' channels.
Common Interface Module (optional)

The Common INTERFACE enables the receipt of Pay TV. It is connected by a flat cable (on the right) with the I-CLink of the WinTV-Nexus-s card.

Specifications:
  • Common INTERFACE decoding module for the DVB standard
  • Card location places a PCMCIA II to the accommodation of two I-CModules to the order
  • Inserts into a single PCI slot (serves only for the mounting plate)
  • Jumper for adjustment at 3v / 5V of I-CModules


Support for the following Condition Access Modules. Upgrade through RS-232C (STB to STB, PC to STB)
Viaccess Tested and working
Cryptoworks Tested and working
Irdeto Tested and working
Seca Tested and working with ab V.1.23b
Betacrypt Tested and working
PowerVu NOT Tested
Mediaguard NOT Tested
Conax Tested and working
Nagravision Tested and working with ab V.1.23b
Eurocrypt (M, S2) NOT Tested
Allcam Tested and working
 
s_logo s_logo
        All Rights Reserved Copyright 2004